SFOE standard catalogue · Refrigeration Technology · Version 2.0
The goal is to standardize the calculation of electricity savings that are triggered by replacing inefficient cooling products up to 250 kW with energy-efficient units.
Examples and Scenarios
Replacement of a refrigeration system with 150 kW cooling capacity
180'000kWh
eligible kWh, accumulated over the measure's lifetime
Funding contributionCHF 9’000
Inputs: Kälteleistung: 150 kW, SEER vorher: 2.8, SEER nachher: 4.2, Volllaststunden: 3'000 h/a
Requirements
Only measures that meet the requirements of the Energy Ordinance (SR 730.01; EnV) can be credited. The additional requirements for the technical characteristics and for the implementation of the measure are set out in Table 1.
| Old system | New system | |
|---|---|---|
| Technology | Mains-operated cooling products within the scope of Annexes 1.14 or 2.11 EnEV (SR 730.02; EnEV) with a rated cooling capacity of up to 250 kW. All types of cascade systems are excluded. | |
| Energy efficiency | Medium on the condensation side | Air |
| Room air-conditioning (SEER) | ≥ 4.4 | |
| Process HT (SEPR) ¹ | ≥ 6.0 | |
| Process MT (SEPR) ² | ≥ 3.5 | |
| Process LT (SEPR) ² | ≥ 2.0 | |
| Sizing | The total installed rated cooling capacity of the new system must be less than or equal to the total installed rated cooling capacity of the old system. In addition, it must be demonstrated that a reduction in cooling capacity has been examined and implemented as far as possible. | |
| Implementation | The replacement and commissioning of the new system must be carried out by a qualified specialist or company. | |
¹ HT: high operating temperature as defined in Annex 2.11 EnEV
² MT: medium / TT: low operating temperature as defined in Annex 1.14 EnEV
Proof of compliance
Compliance with the requirements must be demonstrated by the following documents. The documents listed in Table 2 are an integral part of the proof of measure implementation.
| Symbol | Description | Unit |
|---|---|---|
ΔE | annual electricity savings | kWh/a |
ΔEeco | cumulative electricity savings | kWh |
PK | cooling capacity | kW |
SEER | Seasonal Energy Efficiency Ratio | — |
hVL | annual full load hours | h/a |
Ns | standard effective duration | a |
Annual Electricity Savings
The annual electricity savings result from the cooling capacity, full load hours and the difference in seasonal efficiency before and after replacement.
Cumulative Electricity Savings
The cumulative electricity savings result from the annual savings multiplied by the standard effective duration.
Downloads
Previous measure
← KA-01a · Replacement of Air Conditioning Units up to 12 kW in Non-Residential SpacesNext measure
KA-03a · Cleaning of Condensers and Recoolers →Other measures in Refrigeration Technology
Standardised measures are one of two measure types in the EFFEL programme (efficiency improvements by electricity suppliers, Art. 46b EnG). They follow a predefined SFOE catalogue with fixed savings values.